How to Assign IP Address to Your PC Using Command Prompt.
कमाण्ड प्राम्प्ट और आई पी एड्रेस 

IP Address:- 

A Unique String Of Numbers Separated By Full Stops That Identifies Each Computer Using The Internet Protocol To Communicate Over A Network.IP Address Is A 32-Bit Decimal Address Assigned To The Device Which Is Connected To Computer Network.

You Can Configure IP Address By Various Methods Either By Using GUI Method Or CUI Method. Here I Am Going To Explain The Steps To Configure IP Address, Default Gateway, Subnet Mask & DNS Servers Address Through Command Prompt....

> To Find The IP Address Details On Command Prompt Type The Following Into Command Prompt-

                netsh interface ipv4 show address

>To Assign IP Address to your PC

     * To Assign IP Address From DHCP Server Type Following On CMD Prompt

                netsh interface ip set address name="Local Area Connection" source=dhcp

    

     * To Assign Manual IP Address To Your PC Type Following On CMD Prompt

               netsh interface ip set address name="Local Area Connection" static 192.168.88.91 255.255.255.0 192.168.88.1

 > To Assign DNS Address To Your PC From DHCP Server, Type The Following Into Cmd Prompt-

               netsh interface ip set dnsservers name="Local Area Connection" source=dhcp

 > To Assign DNS Address Manually To Your PC, Type The Following Into Command Prompt-

         *Preferred DNS Server              

              netsh interface ip set dns name="Local Area Connection" static 202.56.230.7

         *Alternate DNS Server

              netsh interface ipv4 add dnsserver "Local Area Connection" 202.56.230.2 index=2

.دھنئیواد  To Visit...............
TO KNOW THE IP ADDRESS ON THE INTERNET VISIT : whatismyipaddress.com